Significant New Discovery at Mavis Lake's Main Zone
Released
Released
Announcement PDF
ASX Announcement
28 October 2024
Significant New Discovery at Mavis
Lake's Main Zone
Highlights
•
Drill hole MF24-248 at the Mavis Lake Main Zone intersected a substantial spodumenebearing pegmatite outside of current resource shapes, with and exceptional 34.9m
intersection including:
-
34.90m @ 1.02% Li₂O from ~131m downhole including,
-
27.40m @ 1.24% Li₂O from ~131m downhole including,
-
12.45m @ 1.90% Li₂O from ~143m downhole and,
-
7.45m @ 1.54% Li₂O from ~80m downhole including,
-
4.0m @ 2.50% Li₂O from ~83m downhole
•
The new intercept demonstrates the further potential for scale and resource growth on
top of the current resource and approximately 16,753m of drilling yet to be
incorporated into the resource estimate
•
Drilling will now continue to test outside of the resource shapes at Mavis Lake targeting
resource growth
Lithium exploration and project development company Critical Resources Limited ASX: CRR
(“Critical Resources” or “the Company”) is pleased to announce a significant new discovery at its
100% owned Mavis Lake Project in Ontario, Canada. The current phase of drilling is strategically
focused on resource expansion at the Main Zone of Mavis Lake.
The Mavis Lake Main Zone, drill hole MF24-248 intersected high-grade spodumene-bearing
pegmatite outside the current resource shapes. This current intercept represents substantial
progress toward our strategic goal of expanding the Mineral Resource Estimate (MRE) and
achieving our exploration targets.
Mavis Main Zone Growth
Assay results from the first drill hole of the targeted drilling campaign at Mavis Lake has returned a
significant intercept of 34.9 meters of 1.02% Li₂O from a depth of 131.55 meters of spodumenebearing pegmatite, as shown in table 1. This intercept occurs outside the current resource shapes
in a gap within the model where a swell was anticipated but previously unconfirmed, as shown in
figure 1. The successful intersection of this zone validates the geological model and highlights the
potential for additional high-grade mineralisation in the area.
Critical Resources Limited
ABN 12 145 184 667
ASX: CRR
Level 45, 108 St Georges Terrace, Perth WA 6000
P. +61 (8) 9465 1024 W. criticalresources.com.au E. info@criticalresources.com.au
This new discovery is expected to contribute to future resource growth at Mavis Lake, enhancing
the project's overall potential of testing the Main Zone area. By confirming the swell zone trend
continuation, this has opened up further opportunities for expansion, supporting the possibility of
adding more tonnage through further targeted drilling efforts at the Main Zone. Drilling at Mavis
Lake is planned to test several potential areas for significant resource growth.
Table 1: Significant Li2O mineralisation intercepts, Mavis Lake Main Zone deposit.
Mavis Pegmatite Intercepts
Hole ID
From
(m)
To (m)
Width*
(m)
Li2O
MF24-248
80.75
88.2
7.45
1.54%
incl.
83.2
87.2
4
2.50%
and
131.55
166.45
34.9
1.02%
Incl.
131.55
158.95
27.4
1.24%
incl.
143.55
156
12.45
1.90%
and
268.15
273.5
5.35
1.04%
incl.
269.15
272.5
3.35
1.52%
Figure 1: Mavis Lake Main Zone cross-section illustrating the newly defined
mineralisation from MF24-248.
Page 2 of 15
Critical Resources’ Exploration Manager, Troy Gallik, commented:
“We are excited with these early results from our latest drilling program at Mavis Lake that are a
further step in unlocking the geological potential of the area. The significant intercept of 34.9m at
1.02% Li₂O in drill hole MF24-248 has successfully confirmed high-grade lithium mineralisation
continues to occur beyond our current resource projections, highlighting substantial potential for
resource expansion.”
Looking Ahead
The ongoing drilling program at Mavis Lake is poised to target new priority areas of exploration to
uncover additional high-grade lithium mineralisation beyond the current Mineral Resource
Estimate (MRE). By investigating previously untested sections of the Main Zone, the team aims to
define the extent of known mineralisation shapes and identify new opportunities for resource
growth.
At the Tot Pegmatite, the focus will be on drilling to delineate the geometry and the overall
pegmatite system. This drill campaign is expected to provide critical insights into the pegmatite
emplacement which will further validate the potential of the Tot Pegmatite area. Together, these
efforts will contribute to enhancing the overall resource profile of the Mavis Lake Project and
support future resource estimates.
Currently a total of 15 drill holes from Main Zone Mavis Lake area are pending assay results. All
pending drill holes were focused on either exploratory targets or immediate resource growth
potential.
This announcement has been approved for release by the Board of Directors.
-endsFor further information please contact
E: info@criticalresources.com.au
P: +61 (8) 9465 1024
ABOUT CRITICAL RESOURCES LIMITED Critical Resources is focused on the exploration, development and delivery of the
critical metals required for a decarbonized future, underpinned by a portfolio of lithium projects in Ontario, Canada
which are ideally positioned to participate in the rapidly growing North American battery materials supply chain.
The Company’s principal focus is on its flagship Mavis Lake Lithium Project in Ontario, Canada, where it has completed
over 45,000m of drilling and defined a maiden Inferred Mineral Resource of 8Mt grading 1.07% Li2O. Recent exploration
success has demonstrated substantial potential to expand this resource and make new discoveries in the surrounding
area. Critical is progressing a dual-track strategy at Mavis Lake of targeting resource growth in parallel with multiple
permitting and project development workstreams.
Page 3 of 15
COMPETENT PERSONS STATEMENT The information in this ASX Announcement that relates to Exploration Results is based
on information compiled by Mr. Troy Gallik (P. Geo), a Competent Person who is a Member of the Association of
Professional Geoscientists of Ontario. Troy Gallik is a full-time employee of Critical Resources. Mr. Gallik has sufficient
experience that is relevant to the style of mineralisation and type of deposit under consideration and to the activity
being undertaken to qualify as a Competent Person as defined in the 2012 Edition of the “Australasian Code for
Reporting of Exploration Results, Mineral Resources and Ore Reserves”. Mr. Gallik consents to the inclusion in this
Announcement of the matters based on his information in the form and context in which it appears.
This document contains information relating to the Mineral Resource estimate for the Mavis Lake Lithium Project is
extracted from the Company’s ASX announcement dated 5 May 2023 and reported in accordance with the 2012
JORC Code and available for viewing at criticalresources.com.au. The Company confirms that it is not aware of any
new information or data that materially affects the information included in the original announcement and that all
material assumptions and technical parameters underpinning the Mineral Resource estimate continue to apply and
have not materially changed.
FORWARD LOOKING STATEMENTS THIS announcement may contain certain forward-looking statements and projections.
Such forward looking statements/projections are estimates for discussion purposes only and should not be relied upon.
Forward looking statements/projections are inherently uncertain and may therefore differ materially from results
ultimately achieved. Critical Resources Limited does not make any representations and provides no warranties
concerning the accuracy of the projections and disclaims any obligation to update or revise any forward-looking
statements/projects based on new information, future events or otherwise except to the extent required by applicable
laws. While the information contained in this report has been prepared in good faith, neither Critical Resources Limited
or any of its directors, officers, agents, employees or advisors give any representation or warranty, express or implied, as
to the fairness, accuracy, completeness or correctness of the information, opinions and conclusions contained in this
announcement.
Page 4 of 15
APPENDIX
Table 2: Drill Hole Summary of MF24-248
Hole ID
MF24-248
Date Drilled
09-Sep-24
15-Sep-24
UTM Zone 15N (NAD83)
524519
5518066
433.6
Collar Orientation
310
73
Metres Drilled
3
419
Figure 2: Plan Map of MF24-248 Collar Location
Drilling Program Details
The drilling program consists of diamond core drilling, with a significant focus on drilling in
previously under-explored areas within the Northern Prospects, aiming to expand the Mavis Lake
resource. Previous drilling, along with advanced geophysical and geochemical techniques,
guides the targeting process, ensuring precision in identifying the most promising drill locations.
The data being collected not only contributes to expanding the resource but also provides
critical insights into the broader geological framework of the Mavis Lake Project Area.
Page 5 of 15
Mavis Lake Project – A Premier Lithium Asset
The Mavis Lake Lithium Project is located in a region known for its robust infrastructure, including
proximity to the Dryden township (~15km away), transportation networks, skilled labor, schools,
airports, hospitals and engineering services all with access to green power, which are
advantageous for future project development. The region's rich geological endowment, coupled
with Critical Resources' strategic exploration approach, positions Mavis Lake as one of the most
promising lithium projects in North America.
Page 6 of 15
JORC Table 3 – MF24-248
(all sample assay results from MF24-248)
Hole
Sample
From (m)
To (m)
Li (ppm)
Li2O (%)
Hole
Sample
From (m)
To (m)
Li (ppm)
Li2O (%)
MF24-248
332001
3.00
4.25
25
0.01
MF24-248
332044
140.55
141.55
160
0.03
MF24-248
332002
4.25
5.25
52
0.01
MF24-248
332045
141.55
142.55
516
0.11
MF24-248
332003
5.25
6.25
230
0.05
MF24-248
332046
142.55
143.55
551
0.12
MF24-248
332004
6.25
7.25
138
0.03
MF24-248
332047
143.55
144.55
13900
2.99
MF24-248
332005
48.75
49.75
331
0.07
MF24-248
332048
144.55
145.55
7180
1.55
MF24-248
332006
49.75
50.75
693
0.15
MF24-248
332049
145.55
146.55
14700
3.16
MF24-248
332007
50.75
51.60
108
0.02
MF24-248
332051
146.55
147.55
8650
1.86
MF24-248
332008
51.60
52.60
95
0.02
MF24-248
332052
147.55
148.55
4340
0.93
MF24-248
332009
52.60
53.60
1850
0.40
MF24-248
332053
148.55
149.55
5350
1.15
MF24-248
332011
53.60
54.60
736
0.16
MF24-248
332054
149.55
150.55
6210
1.34
MF24-248
332012
60.45
60.75
139
0.03
MF24-248
332055
150.55
151.55
13500
2.91
MF24-248
332013
78.75
79.75
302
0.06
MF24-248
332056
151.55
152.55
11100
2.39
MF24-248
332014
79.75
80.75
725
0.16
MF24-248
332057
152.55
153.00
11800
2.54
MF24-248
332015
80.75
81.20
170
0.04
MF24-248
332058
153.00
154.00
6460
1.39
MF24-248
332016
81.20
82.20
2900
0.62
MF24-248
332059
154.00
155.00
2070
0.45
MF24-248
332017
82.20
83.20
2030
0.44
MF24-248
332061
155.00
156.00
11000
2.37
MF24-248
332018
83.20
84.20
7430
1.60
MF24-248
332062
156.00
157.00
2430
0.52
MF24-248
332019
84.20
85.20
16300
3.51
MF24-248
332063
157.00
158.00
560
0.12
MF24-248
332021
85.20
86.20
13700
2.95
MF24-248
332064
158.00
158.95
204
0.04
MF24-248
332022
86.20
87.20
9320
2.01
MF24-248
332065
158.95
160.00
2660
0.57
MF24-248
332023
87.20
88.20
1570
0.34
MF24-248
332066
160.00
161.00
3220
0.69
MF24-248
332024
88.20
89.30
1370
0.29
MF24-248
332067
161.00
162.00
82
0.02
MF24-248
332025
89.30
90.30
1240
0.27
MF24-248
332068
162.00
162.80
180
0.04
MF24-248
332026
90.30
91.30
2070
0.45
MF24-248
332069
162.80
163.45
2270
0.49
MF24-248
332027
91.30
92.30
672
0.14
MF24-248
332071
163.45
164.45
187
0.04
MF24-248
332028
92.30
93.30
1170
0.25
MF24-248
332072
164.45
165.45
111
0.02
MF24-248
332029
93.30
94.30
1070
0.23
MF24-248
332073
165.45
166.45
241
0.05
MF24-248
332031
94.30
95.30
937
0.20
MF24-248
332074
166.45
167.45
736
0.16
MF24-248
332032
129.55
130.55
688
0.15
MF24-248
332075
167.45
168.45
1970
0.42
MF24-248
332033
130.55
131.55
1530
0.33
MF24-248
332076
168.45
169.45
1780
0.38
MF24-248
332034
131.55
132.55
69
0.01
MF24-248
332077
169.45
170.45
659
0.14
MF24-248
332035
132.55
133.55
73
0.02
MF24-248
332078
170.45
171.45
460
0.10
MF24-248
332036
133.55
134.55
5860
1.26
MF24-248
332079
177.10
178.10
390
0.08
MF24-248
332037
134.55
135.55
1300
0.28
MF24-248
332081
178.10
179.10
812
0.17
MF24-248
332038
135.55
136.55
4230
0.91
MF24-248
332082
179.10
179.80
75
0.02
MF24-248
332039
136.55
137.55
4230
0.91
MF24-248
332083
179.80
180.80
804
0.17
MF24-248
332041
137.55
138.55
12200
2.63
MF24-248
332084
180.80
181.80
1040
0.22
MF24-248
332042
138.55
139.55
8790
1.89
MF24-248
332085
181.80
183.00
823
0.18
MF24-248
332043
139.55
140.55
6330
1.36
MF24-248
332086
183.00
184.25
786
0.17
Page 7 of 15
Hole
Sample
From (m)
To (m)
Li (ppm)
Li2O (%)
Hole
Sample
From (m)
To (m)
Li (ppm)
Li2O (%)
MF24-248
332087
184.25
185.25
2000
0.43
MF24-248
332126
274.50
275.50
1460
0.31
MF24-248
332088
185.25
186.25
1040
0.22
MF24-248
332127
275.50
276.50
1040
0.22
MF24-248
332089
186.25
187.35
154
0.03
MF24-248
332128
276.50
277.50
327
0.07
MF24-248
332091
187.35
188.35
113
0.02
MF24-248
332129
277.50
278.50
214
0.05
MF24-248
332092
188.35
189.35
108
0.02
MF24-248
332131
341.65
342.65
369
0.08
MF24-248
332093
189.35
190.35
66
0.01
MF24-248
332132
342.65
343.65
572
0.12
MF24-248
332094
190.35
191.35
1700
0.37
MF24-248
332133
343.65
344.65
739
0.16
MF24-248
332095
191.35
192.35
405
0.09
MF24-248
332134
344.65
345.65
1110
0.24
MF24-248
332096
202.50
203.50
930
0.20
MF24-248
332135
345.65
346.10
190
0.04
MF24-248
332097
203.50
204.50
1630
0.35
MF24-248
332136
346.10
347.10
166
0.04
MF24-248
332098
204.50
205.00
3230
0.70
MF24-248
332137
347.10
348.10
125
0.03
MF24-248
332099
205.00
206.00
2830
0.61
MF24-248
332138
348.10
349.10
2280
0.49
MF24-248
332101
206.00
207.00
2430
0.52
MF24-248
332139
349.10
350.10
1070
0.23
MF24-248
332102
207.00
208.00
1000
0.22
MF24-248
332141
358.85
359.85
366
0.08
MF24-248
332103
208.00
208.70
787
0.17
MF24-248
332142
359.85
360.85
707
0.15
MF24-248
332104
208.70
209.00
737
0.16
MF24-248
332143
360.85
362.15
166
0.04
MF24-248
332105
209.00
210.00
678
0.15
MF24-248
332144
362.15
363.15
839
0.18
MF24-248
332106
210.00
211.35
479
0.10
MF24-248
332145
363.15
364.15
570
0.12
MF24-248
332107
211.35
211.85
472
0.10
MF24-248
332146
379.80
380.80
334
0.07
MF24-248
332108
211.85
212.85
322
0.07
MF24-248
332147
380.80
381.80
336
0.07
MF24-248
332109
212.85
213.85
250
0.05
MF24-248
332148
381.80
382.20
208
0.04
MF24-248
332111
242.70
243.70
209
0.04
MF24-248
332149
382.20
383.20
397
0.09
MF24-248
332112
243.70
244.70
206
0.04
MF24-248
332151
383.20
384.20
390
0.08
MF24-248
332113
244.70
245.35
45
0.01
MF24-248
332152
384.20
385.20
399
0.09
MF24-248
332114
245.35
246.35
250
0.05
MF24-248
332153
385.20
386.20
462
0.10
MF24-248
332115
246.35
247.35
177
0.04
MF24-248
332154
393.50
393.85
225
0.05
MF24-248
332116
265.15
266.15
378
0.08
MF24-248
332155
393.85
401.20
293
0.06
MF24-248
332117
266.15
267.15
321
0.07
MF24-248
332156
404.10
405.10
229
0.05
MF24-248
332118
267.15
268.15
3440
0.74
MF24-248
332157
405.10
406.10
454
0.10
MF24-248
332119
268.15
269.15
1850
0.40
MF24-248
332158
406.10
406.45
82
0.02
MF24-248
332121
269.15
270.15
8760
1.89
MF24-248
332159
406.45
407.65
379
0.08
MF24-248
332122
270.15
271.50
7360
1.58
MF24-248
332161
407.65
408.15
353
0.08
MF24-248
332123
271.50
272.50
4960
1.07
MF24-248
332162
408.15
409.15
403
0.09
MF24-248
332124
272.50
273.50
223
0.05
MF24-248
332163
409.15
410.15
302
0.06
MF24-248
332125
273.50
274.50
2400
0.52
Page 8 of 15
JORC Table 4 and 5
Exploration Results
Section 1: Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections)
Criteria
JORC-Code Explanation
Commentary
Sampling
Nature and quality of sampling
• Oriented NQ core was cut in half using a diamond saw, with a
or specific specialised industry
• No other measurement tools other than directional survey tools
techniques
(e.g., cut channels, random chips,
standard measurement tools
half core sent for assay and half core retained.
have been used in the holes at this stage.
appropriate to the minerals under
investigation, such as down hole
gamma sondes, or handheld XRF
instruments, etc). These examples
should not be taken as limiting the
broad meaning of sampling.
• Oriented core was placed V-rail and a consistent cutline drawn
along core to ensure cutting (halving) of representative samples.
Include reference to measures
taken to ensure sample
• Sampling is conducted based on core logging, 100% of drill hole
core is logged. The core logger is a geologist, has experience in
lithium mineralisation, and determines the intervals of samples. All
representivity and the appropriate pegmatite intersections are sampled regardless of the visual
calibration of any measurement
tools or systems used.
Aspects of the determination of
presence of lithium minerals/spodumene. Host rock is typically
not sampled as lithium mineralisation is localized to pegmatites
(spodumene mineral) or their alteration halos (holmquistite
mineralisation that are Material to mineral) within mafic volcanic host rock.
the Public Report. In cases where
• Determination of mineralisation has been based on
‘industry standard’ work has been geological logging and photo analysis.
done this would be relatively
simple (e.g., ‘reverse circulation
drilling was used to obtain 1 m
samples from which 3 kg was
pulverised to produce a 30 g
charge for fire assay’). In other
cases, more explanation may be
required, such as where there is
coarse gold that has inherent
sampling problems. Unusual
commodities or mineralisation
types (e.g., submarine nodules)
may warrant disclosure of detailed
• Diamond Core drilling was used to obtain 3m length
samples from the barrel which are then marked in one
metre intervals based on the drillers core block
measurement.
• Assay samples are selected based on geological
logging boundaries or on the nominal metre marks.
• Samples will be dispatched to an accredited laboratory
(ActLabs) in Dryden, Ontario, Canada for sample preparation and
shipment to analysis.
information.
Drilling
techniques
Drill type (e.g., core, reverse
• NQ2 diamond double tube coring by Cyr EF-50 rig was used
circulation, open-hole hammer,
throughout the hole.
sonic, etc) and details (e.g., core
• Core orientation was carried out by the drilling contractor.
rotary air blast, auger, Bangka,
diameter, triple or standard tube,
depth of diamond tails, face-
sampling bit or other type, whether
Page 9 of 15
Criteria
JORC-Code Explanation
Commentary
Drill sample
Method of recording and
• Lithological logging, photography
recovery
assessing core and chip sample
recoveries and results assessed.
• Core samples were measured with a standard tape within the
core trays. Length of core was then compared to the interval
drilled, and any core loss was attributed to individual rock units
based on the amount of fracturing, abrasion of core contacts,
and the conservative judgment of the core logger. Results of core
Measures taken to maximise
loss are discussed below.
representative nature of the
• Experienced driller contracted to carry out drilling.
sample recovery and ensure
samples.
•In broken ground the driller produced NQ core from short runs to
maximise core recovery.
Whether a relationship exists
between sample recovery and
grade and whether sample bias
may have occurred due to
preferential loss/gain of
fine/coarse material.
• Core was washed before placing in the core trays.
• Core was visually assessed by professional geologists before
cutting to ensure representative sampling.
• See “Aspects of the determination of mineralisation that are
Material to the Public Report” above.
Logging
Whether core and chip samples
have been geologically and
geotechnically logged to a level of
detail to support appropriate
Mineral Resource estimation,
mining studies and metallurgical
studies.
Whether logging is qualitative or
quantitative in nature. Core (or
costean, channel, etc)
photography.
• Core samples were not geotechnically logged.
• Core samples have been geologically logged to support
appropriate Mineral Resource estimation, mining studies and
metallurgical studies.
• The core logging was qualitative in nature.
• All core was photographed
Total length of the MF24-248 was 419m
• 100% of the relevant intersections were logged.
The total length and percentage
of the relevant intersections
logged.
Sub-sampling
techniques and
If core, whether cut or sawn and
whether quarter, half or all cores
taken.
Page 10 of 15
Criteria
JORC-Code Explanation
sample
If non-core, whether riffled, tube
preparation
Commentary
sampled, rotary split, etc and
whether sampled wet or dry.
For all sample types, the nature,
quality and appropriateness of the
sample preparation technique.
•Oriented core was placed V-rail and a consistent cutline
drawn along core to ensure cutting (halving) of representative
samples
Quality control procedures
•Oriented NQ core was cut in half using a diamond saw, with half
adopted for all sub-sampling
core sent for assay and half core retained.
of samples.
•Core sample intervals were based in logged mineralisation
stages to maximise representivity
Measures taken to ensure that the •No duplicates or second half-sampling
sampling is representative of the
in-situ material collected,
including for instance results for
field duplicate/second-half
• Appropriate method: oriented NQ core cut in half using a
diamond saw, with a half core sent for assay and half core
retained
sampling.
Whether sample sizes are
appropriate to the grain size of the
material being sampled.
Quality of assay The nature, quality and
• Assays methods appropriate for style of mineralisation:
laboratory tests
and laboratory procedures used
ICPOES + ICPMS.
considered partial or total.
•Samples have been sent to an accredited laboratory - Activation
data and
appropriateness of the assaying
and whether the technique is
For geophysical tools,
spectrometers, handheld XRF
instruments, etc, the parameters
UT-7 (Li up to 5%) QOP Sodium Peroxide (Sodium Peroxide Fusion
Laboratories Ltd. (ActLabs).
• Either standards or blanks are inserted every 10th sample interval
as a part of a QAQC process. Standard and blank results from
recent drilling are within acceptable margins of error.
used in determining the analysis
including instrument make and
• Activation Laboratory performs internal QA/QC measures.
factors applied and their
confirmed to be acceptable.
model, reading times, calibrations Results are released once all internal QA/QC is verified and
derivation, etc.
Nature of quality control
procedures adopted (e.g.,
standards, blanks, duplicates,
external laboratory checks) and
whether acceptable levels of
accuracy (i.e., lack of bias) and
precision have been established.
Verification of
The verification of significant
assaying
independent or alternative
sampling and
intersections by either
company personnel.
Page 11 of 15
Criteria
JORC-Code Explanation
Commentary
The use of twinned holes.
• No independent verification completed at this stage.
Documentation of primary data,
data entry procedures, data
verification, data storage (physical • No holes are twins of previous holes.
and electronic) protocols.
Discuss any adjustment to assay
data.
• Core measured, photographed and logged by geologists.
Digitally recorded plus back-up records.
• All assay results are provided.
• No adjustments to the assay data.
• No assay cut off grades are applied.
Location of data Accuracy and quality of surveys
points
used to locate drill holes (collar
• Drill collars recorded with Garmin GPS that has an accuracy in
the order of ±3 metres for location. A registered surveyor will be
and down-hole surveys), trenches, contracted to accurately survey all drill collars at completed of
mine workings and other locations drill program.
used in Mineral Resource
estimation.
Specification of the grid system
used.
Quality and adequacy of
topographic control.
Data spacing
and distribution
Data spacing for reporting of
Exploration Results.
Whether the data spacing, and
• WGS 1984 UTM Zone 15N.
• No specific topography survey has been completed over the
project area.
• Not relevant to current drilling.
• Not relevant to current drilling.
distribution is sufficient to establish
the degree of geological and
grade continuity appropriate for
the Mineral Resource and Ore
Reserve estimation procedure(s)
•Core sample intervals were based in logged mineralisation and
no sample composting applied. Reporting of final results includes
many weighted average- composting of assay data.
and classifications applied.
Whether sample compositing has
been applied.
Orientation of
Whether the orientation of
to geological
sampling of possible structures
data in relation
structure
sampling achieves unbiased
and the extent to which this is
known, considering the deposit
type.
• The orientation of the mineralisation is unknown. The drilling
program is aimed at determining orientation of the
mineralisation.
• If orientation of mineralisation is known or thought to be known,
drill holes are planned to intersect at an appropriate angle
relative to true width of the mineralisation. Intercepts with
If the relationship between the
drilling orientation and the
orientation of key mineralised
structures is considered to have
Page 12 of 15
Criteria
JORC-Code Explanation
Commentary
introduced a sampling bias, this
mineralisation released are given as downhole widths, not true
if material.
• It is uncertain whether sampling bias has been introduced, or
should be assessed and reported widths unless true widths are stated
whether the thickness drilled is a true thickness.
Sample security The measures taken to ensure
sample security.
• Core samples were stored at the Dryden core yard and core
shack under lock and key before delivery to ActLabsGroups in
Dryden, Ontario for analysis.
Audits or reviews The results of any audits or reviews • Not undertaken at this stage.
of sampling techniques and data.
Section 2: Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section)
Criteria
JORC-Code Explanation
Commentary
Mineral
Type, reference name/number,
The Mavis Lake Lithium Project consists of 189 unpatented Single
land tenure
Cell Mining Claims and six separate surface leases which secure
agreements or material issues with the surface rights of the land required for the Project footprint.
third parties such as joint ventures,
tenement and
status
location and ownership including
partnerships, overriding royalties,
native title interests, historical sites,
wilderness or national park and
environmental settings.
All claims and leases are active and in good standing. The
leases have a term of 21 years and are not set to expire until
2032, at which time they can be renewed for an additional 21
years if required.
The security of the tenure held at
the time of reporting along with
any known impediments to
obtaining a licence to operate in
the area.
Exploration done Acknowledgment and appraisal of • Previous exploration has been conducted by a number of
parties including Lun-Echo Gold Mines Limited (1956), Selco
by other parties exploration by other parties.
Mining Corporation (1979-1980), Tantalum Mining Corporation of
Canada Limited (1981-1982), Emerald Field Resources (2002),
International Lithium Corp (2006-2021) and Pioneer Resources
Limited/Essential Metals Limited (2018-2021).
Geology
Deposit type, geological setting
Drill hole
A summary of all information
Information
and style of mineralisation.
material to the understanding of
the exploration results including a
tabulation of the following
information for all Material drill
holes:
• The Fairservice and Mavis Lake Prospects host zoned pegmatites
that are prospective for lithium and tantalum
Hole ID
Easting
Northing
Elevation
Az
Dip
End
Depth
MF24-248
524519
5518066
433.6
310
-73
419
• All drill collars are re-surveyed at a later date upon completion
of drill hole for accurate collar coordinates.
Easting and northing of the drill
hole collar
Page 13 of 15
Criteria
JORC-Code Explanation
Commentary
Elevation or RL (Reduced Level –
elevation above sea level in
metres) of the drill hole collar
Dip and azimuth of the hole
down hole length and interception
depth
hole length.
If the exclusion of this information
is justified on the basis that the
information is not Material and this
exclusion does not detract from
the understanding of the report,
the Competent Person should
clearly explain why this is the case.
Data
In reporting Exploration Results,
methods
maximum and/or minimum grade
aggregation
weighting averaging techniques,
• Uncut.
trun
Share your feedback
Discover