Desktop Studies Confirm Antimony Prospects at HillgroveSouth
Released
Released
Announcement PDF
ASX Announcement
12 September 2024
Confirmation of Strategic Antimony Prospects
Close to the Hillgrove Antimony-Gold Mine
Highlights
•
Early results from desktop study confirm four historic antimony prospects on Halls Peak
Project that have never been subjected to modern exploration.
•
The Hillgrove South Prospect directly abuts the southern and southeastern boundaries of
Larvotto Resources (ASX:LRV’s) tenure that hosts LRV’s Hillgrove Antimony-Gold Project.
•
Mayview Homestead Stibnite prospect grading 1.55% Sb, is situated ~2.7km east of LRV’s
Hillgrove Antimony-Gold Project.
•
The Mayview antimony prospect is potentially a continuation of the Hillgrove AntimonyGold system, occupying a southeast trending fault or shear zone, similar to many lodes at
the nearby LRV Hillgrove Antimony-Gold Project.
•
The company has commenced exploration planning to explore the potential of the
number of antimony targets present at Halls Peak.
•
Halls Peak maiden Inferred Mineral Resource of 884,000t grading 3.7% zinc, 1.5% lead,
0.4% Copper, 30ppm Silver and 0.1ppm Gold that has been estimated following
numerous drilling campaigns, remains open along strike, and at depth, providing the
potential to increase the MRE, with an immediate exploration target of a further 500,000
to 1,000,000 tonnes at similar grades to the existing maiden MRE (2.7-3.7% zinc, 1.1-1.5%
lead, 0.34-0.44% copper, 27-33ppm silver and 0.08-0.12ppm gold)1.
Critical Resources Limited ASX:CRR (“Critical Resources” or “the Company”) is pleased to
announce that its recent ongoing desktop studies have confirmed strategic Antimony Prospects
within its Halls Peak project area.
Open File Records, Mineral Deposit Data Sheets, of the Geological Survey of New South Wales
indicate multiple Antimony showings within the Halls Peak Project including the Mayview
Homestead Stibnite prospect, situated ~2.7km east of Larvotto Resources Ltd’s (“LRV”) Hillgrove
Antimony-Gold Project.
Given recent discoveries and the global shift in antimony supply dynamics the Company recently
commenced a targeted desktop study at the Hillgrove South Prospect (“the Hillgrove South
Prospect”) at the Company’s Halls Peak Project (“Halls Peak” or “Project”), located in NSW,
Australia. This initiative has initially focused on the Hall Peak tenements staked in 2021, strategically
located ~6km south-east of Larvotto Resources Ltd’s (“LRV”) Hillgrove deposit, which currently hosts
a total resource of 7.264Mt @ 1.3% Sb for 93kt of contained antimony2.
Critical Resources Limited
ABN 12 145 184 667
ASX:CRR
Level 45, 108 St Georges Terrace, Perth WA 6000
P. +61 (8) 9465 1024 W. criticalresources.com.au E. info@criticalresources.com.au
Halls Peak Antimony Prospects
The Company’s Hillgrove South prospect is part of the considerable Halls Peak Project’s tenement
footprint located south-east of Armidale, New South Wales, in the highly prospective New England
Fold Belt, which also hosts LRV’s Hillgrove Antimony-Gold Project. The Company’s South Hillgrove
Prospect, which directly abuts the southern and southeastern boundaries of LRV’s Hillgrove
Antimony-Gold Project, contains the Mayview Homestead Antimony Prospect (Figures 1 and 2).
The Mayview Homestead Antimony Prospect is situated ~2.7km east of LRV’s Hillgrove GoldAntimony Project and is potentially a continuation of the Hillgrove Antimony-Gold system,
occupying a southeast trending fault or shear zone, similar to many lodes at nearby Hillgrove Mine
(Figure 2).
Figure 1: Location of CRR’s Mayview Homestead, Kempsey Road and Riverview Antimony Prospects in
relation to LRV’s Hillgrove Antimony-Gold Project. (Map produced from MinView, Geological Survey of
New South Wales -GSNSW,
Antimony Prospects, Symbol GSNSW)
The records of the Geological Survey of New South Wales (GSNSW) document massive stibnite
(Sb₂S₃) at the Mayview Homestead Antimony Prospect. The GSNSW mapped historical
underground workings, shafts and adits with one working 100m long and 5m wide. The antinomy
mineralisation occupies a fault or shear zone, similar to the dominant stibnite ore structures at the
adjacent LRV Hillgrove Antimony-Gold Project. The structures at the Hillgrove Project have been
proven to extend laterally and vertically for hundreds of metres. An assay sample collected by the
GSNSW about a shaft consisted of quartz veins in mudstone and assayed 1.55% Sb and 0.13ppm
Au. Further work is required to determine if the Mayview Homestead antimony mineralisation is
potentially a continuation of the Hillgrove Project orogenic Antimony-Gold system.
Page 2 of 13
Figure 2: CRR’s Mayview Homestead Antimony Prospect is potentially a continuation of the Hillgrove Mine
orogenic Antimony-Gold system. The Hillgrove South Exploration Licence EL9428 directly abuts the southern
and southeastern boundaries LRV’s antimony-gold mining leases (Map produced from MinView,
Geological Survey of New South Wales -GSNSW,
Antimony Prospects, Symbol GSNSW)
The Riverview and Kempsey Road Antimony Prospects were recorded by the Geological Survey
of NSW in the early 1980’s. The Riverview Prospect consists of adits and underground workings
developed on multiple (stockwork or sheeted) antimony veins developed in granodiorite and is
recorded as an intrusion-related system that could potentially be large scale.
Both the Riverview and Kempsey Road Antimony Prospects are accessible from the Kempsey
Road.
Next-Steps
CRR has engaged expert consultant geologists Paul Degeling and Michael Leu, both with many
years on-the-ground field experience in the Halls Peak/Hillgrove area, to continue to undertake a
detailed desktop study. The desktop study is focused on the potential of Antimony-Gold potential
on the company’s Halls Peak project (previous area of focus for 2022 drilling campaign) and
planning is underway for a mapping and sampling survey of the historic antimony workings located
on the project area together with the potential Hillgrove-style orogenic Antimony-Gold system in
EL4474.
Paul Degeling was a central member of the Geological Survey of New South Wales expert
mapping team that published the key monograph that includes the antimony deposits of the
Hillgrove-Halls Peak region viz. Gilligan, L.B., Brownlow, J.W., Cameron R. G., Henley, H. F. &
Degeling, P. R., 1992. Dorrigo-Coffs Harbour 1:250,000 metallogenic map SH/56-10, SH/56-11:
metallogenic study and mineral deposit data sheets, 509pp., Geological Survey of N.S.W., Sydney.
Paul was the principal geologist who located and documented the Riverview and Kempsey Road
Antimony Prospects.
Page 3 of 13
Antimony Market Overview
The global antimony market is currently navigating a period of significant disruption and
opportunity, driven by China's recent decision to impose export controls on antimony ore, metal,
oxides, and associated smelting and separation technologies starting from 15 September 2024. As
the world’s dominant producer, supplying nearly 50% of global antimony, China’s actions have
tightened market conditions and pushed prices to recent highs of $23,500 per metric tonne. These
controls are expected to further increase market volatility and underscore the strategic
importance of antimony, classified as a critical mineral by the UK, EU, US, Japan, and other key
economies due to supply concentration risks.
Antimony's versatile applications span various industries, including its significant use in flame
retardants, lead-acid batteries, glass manufacturing, and as a critical alloy in ammunition. Its
strategic importance extends to military applications such as infrared missile guidance systems,
night vision equipment, and nuclear weapons, positioning it as a vital element in national security
frameworks.
Critical Resources’ Non-Executive Director, Nigel Broomham, commented;
"We are thrilled to confirm antimony showings within the Halls Peak project area. Our recent
desktop studies have unveiled significant opportunities close to the Hillgrove Antimony-Gold Mine,
highlighting several historic prospects that have yet to be explored with modern techniques.
The Mayview Homestead prospect, situated just 2.7 kilometres east of Larvotto Resources’ Hillgrove
deposit, stands out as particularly promising. Data recorded from the Geological Survey of NSW
which includes grades of 1.55% Sb indicates that it could potentially extend the well-established
Hillgrove Antimony-Gold system, given its alignment with similar fault structures.
Additionally, our desktop analysis has identified the Riverview and Kempsey Road prospects,
documented by the GSNSW in the early 1980s have recorded antimony mineralisation.
Given the current global dynamics in the antimony market, notably the recent export controls
imposed by China, which have spiked prices and intensified market volatility, our findings position
Critical Resources favourably. Antimony's strategic importance in various high-tech and military
applications further enhances the potential value of these prospects.
Looking ahead, we are engaging leading geologists to refine our understanding of these
prospects and plan comprehensive fieldwork, including mapping and sampling, to validate our
initial findings. This strategic approach will ensure that we are well-positioned to capitalize on the
growing demand for this critical mineral and advance our exploration efforts effectively."
Halls Peak Resource Overview
The Company’s Hall Peak maiden Inferred Mineral Resource of 884,000t grading 3.7% zinc, 1.5%
lead, 0.4% Copper, 30ppm Silver and 0.1ppm Gold has been estimated following numerous drilling
campaigns1.
Modelling has shown that mineralisation is still open along strike to the east/north-east and
west/south-west, providing immediate potential to increase the MRE with follow-up drilling. An
exploration target of 500,000 to 1,000,000 Tonnes (2.7-3.7% zinc, 1.1-1.5% lead, 0.34-0.44% copper,
27-33ppm silver and 0.08-0.12ppm gold) has been defined based on modelling and interpretation
of the current resource1.
Page 4 of 13
References:
*1. Refer to CRR ASX Announcement 30 June 2023. Maiden Mineral Resource Estimate for the Halls Peak Zn-Pb-Cu-AgAu Project
*2. Refer to Larvotto Resources (ASX:LRV) ASX Announcement 5 August 2024. Measured Resource 448kt @ 3.8% Sb;
Indicated Resource 3,980kt @ 1.3% Sb and Inferred Resource 2,835kt @ 0.9% Sb.
*3. Open File, DIGS Records, Geological Survey of New Soutth Wales Report: Gilligan, L.B., Brownlow, J.W., Cameron R.
G., Henley, H. F. & Degeling, P. R., 1992. Dorrigo-Coffs Harbour 1:250,000 metallogenic map SH/56-10, SH/56-11:
metallogenic study and mineral deposit data sheets, 509pp., Geological Survey of N.S.W., Sydney.
This announcement has been approved for release by the Board of Directors.
-endsFor further information please contact
E: info@criticalresources.com.au
P: +61 (8) 9465 1024
ABOUT CRITICAL RESOURCES LIMITED Critical Resources is focused on the exploration, development and delivery of the
critical metals required for a decarbonized future, underpinned by a portfolio of lithium projects in Ontario, Canada
which are ideally positioned to participate in the rapidly growing North American battery materials supply chain.
The Company’s principal focus is on its flagship Mavis Lake Lithium Project in Ontario, Canada, where it has completed
over 45,000m of drilling and defined a maiden Inferred Mineral Resource of 8Mt grading 1.07% Li2O. Recent exploration
success has demonstrated substantial potential to expand this resource and make new discoveries in the surrounding
area. Critical is progressing a dual-track strategy at Mavis Lake of targeting resource growth in parallel with multiple
permitting and project development workstreams.
COMPETENT PERSONS STATEMENT The information in this ASX Announcement that relates to Exploration Results is based
on information compiled by Mr Michael Leu, a Competent Person who is a member of Australian Institute of
Geoscientist (AIG) and the Australian Institute of Mining and Metallurgy (AusIMM) and a consultant of Critical
Resources. Mr Leu has sufficient experience that is relevant to the style of mineralisation and type of deposit under
consideration and to the activity being undertaken to qualify as a Competent Person as defined in the 2012 Edition of
the “Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves”. Mr Leu consents to
the inclusion in this Announcement of the matters based on his information in the form and context in which it appears.
This document contains information relating to the Mineral Resource estimate for the Mavis Lake Lithium Project is
extracted from the Company’s ASX announcement dated 5 May 2023 and reported in accordance with the 2012
JORC Code and available for viewing at criticalresources.com.au. This document contains information relating to the
Mineral Resource estimate for the Halls Peak Project is extracted from the Company’s ASX announcement dated 30
June 2024 and reported in accordance with the 2012 JORC Code and available for viewing at
criticalresources.com.au. The Company confirms that it is not aware of any new information or data that materially
affects the information included in the original announcements and that all material assumptions and technical
parameters underpinning the Mineral Resource estimate continue to apply and have not materially changed. This
document contains information relating to the Halls Peak Project extracted from ASX market announcements dated
22 November 2021 reported in accordance with the 2012 edition of the "Australasian Code for Reporting of Exploration
Results, Mineral Resources and Ore Reserves" ("2012 JORC Code") and available for viewing at
https://www.criticalresources.com.au/ or https://www.asx.com.au. The Company confirms that it is not aware of any
new information or data that materially affects the information included in the original ASX market announcements.
FORWARD LOOKING STATEMENTS This announcement may contain certain forward-looking statements and projections.
Such forward looking statements/projections are estimates for discussion purposes only and should not be relied upon.
Forward looking statements/projections are inherently uncertain and may therefore differ materially from results
ultimately achieved. Critical Resources Limited does not make any representations and provides no warranties
concerning the accuracy of the projections and disclaims any obligation to update or revise any forward-looking
statements/projects based on new information, future events or otherwise except to the extent required by applicable
laws. While the information contained in this report has been prepared in good faith, neither Critical Resources Limited
or any of its directors, officers, agents, employees or advisors give any representation or warranty, express or implied, as
to the fairness, accuracy, completeness or correctness of the information, opinions and conclusions contained in this
announcement.
Page 5 of 13
Appendix A; Open File Records, Mineral Deposit Data Sheets, of the Geological Survey of New South Wales
Mayview Homestead Antimony Target
Riverview Antimony
Target
Kempsey Road Antimony
Target
Ref
(DCO657, H1 M)
(DCO849, CA1 M)
(DCO850, BH10, M)
Coordinates
400880mE, 6614110mN
426250mE, 6597500mN
427360mE, 6598070mN
Occurrence
Underground, shafts, adits
Underground, adits
N/A
Extent
Length: 100m, Width: 5m
Length: 2m, Width: 5m
N/A
Province
New England Fold Belt
New England Fold Belt
New England Fold Belt
General
Siltstone, Late Carboniferous,
Greenschist
Felsic plutonic, Middle Triassic
Phyllite, Early Permian,
prehnite-pumpellyite
Lithology
Mudstone
Granodiorite
Phyllite
Structure
Pre-ore, minor fault of shear zone
N/A
N/A
Type
Occupying fault of shear zone
Multiple vein
Vein
Primary Ore
Mineral
Stibnite
Stibnite, arsenopyrite
Stibnite
Gangue
Quartz
Host rock
Host rock
Ore Chars
Massive
Massive
Shape &
extent
Consists of one filled shaft at the
southern end and one collapsed adit
at the
northern end.
Two veins, one 280mm, the
other 40mm wide, dip 710
south, strike 125
N/A
Assay
Assay sample collected about shaft –
quartz veins in mudstone GS83/169:
Au 0.13ppm, Ag 0.4ppm, Cu 50ppm,
Pb 30ppm, Zn 80ppm, As 80ppm, Sb
1.55%, W 350ppm, Sn 25ppm
GS83/169: Au 0.13ppm, Ag 0.4ppm,
Cu 50ppm, Pb 30ppm, Zn 80ppm, As
80ppm, Sb 1.55%, W 350ppm, Sn
25ppm
N/A
N/A
Remarks
Workings trend 1420
Mineralisation occurs in
altered granodiorite,
surrounded by hornblende Biotite granodiorite (P. R.
Degeling pers. com.)
Not visited in field, position
approximate
Entry Date
July 1983
June 1983
Dec. 1984
References
C. Faint (pers. Comm.), fieldwork
(1983), GS1984/109, NSW Geological
Survey unpublished mineral report
83/34
P. R. Degeling (pers. Com.)
P. R. Degeling (pers. Com.)
1.
Open File, DIGS Records, Geological Survey of New Soutth Wales Report: Gilligan, L.B., Brownlow, J.W., Cameron R.
G., Henley, H. F. & Degeling, P. R., 1992. Dorrigo-Coffs Harbour 1:250,000 metallogenic map SH/56-10, SH/56-11:
metallogenic study and mineral deposit data sheets, 509pp., Geological Survey of N.S.W., Sydney
Page 6 of 13
Section 1: Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections)
Criteria
JORC-Code Explanation
Commentary
Sampling
techniques
Nature and quality of sampling
Historical Data. One rock sample reported from: Open File,
(e.g., cut channels, random
DIGS Records, Geological Survey of New Soutth Wales
chips, or specific specialised
industry standard measurement Report: Gilligan, L.B., Brownlow, J.W., Cameron R. G., Henley,
H. F. & Degeling, P. R., 1992. Dorrigo-Coffs Harbour 1:250,000
tools appropriate to the
metallogenic map SH/56-10, SH/56-11: metallogenic study
minerals under investigation,
and mineral deposit data sheets, 509pp., Geological Survey
such as down hole gamma
of N.S.W., Sydney. “Mayview Homestead Antimony Prospect
sondes, or handheld XRF
(DCO657, H1 M), Assay sample collected about shaft –
instruments, etc). These
examples should not be taken quartz veins in mudstone GS83/169: Au 0.13ppm, Ag 0.4ppm,
as limiting the broad meaning Cu 50ppm, Pb 30ppm, Zn 80ppm, As 80ppm, Sb 1.55%, W
350ppm, Sn 25ppm”
of sampling.
Include reference to measures
taken to ensure sample
representivity and the
appropriate calibration of any
measurement tools or systems
used.
Aspects of the determination of
mineralisation that are Material
to the Public Report. In cases
where ‘industry standard’ work
has been done this would be
relatively simple (e.g., ‘reverse
circulation drilling was used to
obtain 1 m samples from which
3 kg was pulverised to produce
a 30 g charge for fire assay’). In
other cases more explanation
may be required, such as
where there is coarse gold that
has inherent sampling
problems. Unusual commodities
or mineralisation types (e.g.,
submarine nodules) may
warrant disclosure of detailed
information.
Drilling
techniques
Not applicable, historical rock sampling program
Drill type (e.g., core, reverse
circulation, open-hole hammer,
rotary air blast, auger, Bangka,
sonic, etc) and details (e.g.,
core diameter, triple or
standard tube, depth of
diamond tails, face-sampling
bit or other type, whether core
is oriented and if so, by what
method, etc).
Page 7 of 13
Criteria
JORC-Code Explanation
Commentary
Drill sample
recovery
Method of recording and
Not applicable, historical rock sampling program
assessing core and chip sample
recoveries and results assessed.
Measures taken to maximise
sample recovery and ensure
representative nature of the
samples.
Whether a relationship exists
between sample recovery and
grade and whether sample
bias may have occurred due to
preferential loss/gain of
fine/coarse material.
Logging
Whether core and chip
samples have been
geologically and
geotechnically logged to a
level of detail to support
appropriate Mineral Resource
estimation, mining studies and
metallurgical studies.
The single rock chip was geologically described the time of
collection by a qualified geologist from the Geological Survey
of New South Wales. The descriptions were of sufficient detail
to support the current work. Not applicable
Whether logging is qualitative
or quantitative in nature. Core
(or costean, channel, etc)
photography.
The total length and
percentage of the relevant
intersections logged.
Sub-sampling If core, whether cut or sawn
Single rock sample reported was collected by a qualified
techniques and and whether quarter, half or all geologist from the Geological Survey of New South Wales and
sample
core taken.
presumed to samples representative of the material identified
preparation
during fieldwork
If non-core, whether riffled,
tube sampled, rotary split, etc
and whether sampled wet or
dry.
The sample size not recorded.
For all sample types, the nature,
quality and appropriateness of
the sample preparation
technique.
Quality control procedures
adopted for all sub-sampling
stages to maximise
representivity of samples.
Measures taken to ensure that
the sampling is representative
of the in situ material collected,
including for instance results for
field duplicate/second-half
sampling.
Page 8 of 13
Criteria
JORC-Code Explanation
Commentary
Whether sample sizes are
appropriate to the grain size of
the material being sampled.
Quality of assay The nature, quality and
Historical Data, sample reported was collected by a
data and
appropriateness of the assaying qualified geologist from the Geological Survey of New South
laboratory tests and laboratory procedures
Wales
used and whether the
technique is considered partial
No analytical method stated but presumed to be XRF by a
or total.
certified laboratory
For geophysical tools,
spectrometers, handheld XRF
instruments, etc, the
parameters used in determining
the analysis including
instrument make and model,
reading times, calibrations
factors applied and their
derivation, etc.
Nature of quality control
procedures adopted (e.g.,
standards, blanks, duplicates,
external laboratory checks)
and whether acceptable levels
of accuracy (i.e., lack of bias)
and precision have been
established.
Verification of
sampling and
assaying
The verification of significant
intersections by either
independent or alternative
company personnel.
The use of twinned holes.
The rock sample data was by a qualified geologist from the
Geological Survey of New South Wales
No drilling,
No adjustments to data
Documentation of primary
data, data entry procedures,
data verification, data storage
(physical and electronic)
protocols.
Discuss any adjustment to assay
data.
Location of
data points
Accuracy and quality of
All current data is in MGA94 grid system.
surveys used to locate drill holes
(collar and down-hole surveys),
trenches, mine workings and
other locations used in Mineral
Resource estimation.
Specification of the grid system
used.
Quality and adequacy of
topographic control.
Page 9 of 13
Criteria
JORC-Code Explanation
Commentary
Data spacing Data spacing for reporting of
and distribution Exploration Results.
Single rock sample reported was collected by a qualified
geologist from the Geological Survey of New South Wales and
presumed to samples representative of the material identified
Whether the data spacing, and during fieldwork
distribution is sufficient to
The data spacing and distribution was not intended and is not
establish the degree of
sufficient to establish the degree of geological and grade
geological and grade
continuity appropriate for the Mineral Resource and Ore
continuity appropriate for the Reserve estimation procedure(s) and classifications applied.
Mineral Resource and Ore
The work completed was appropriate for the current early
Reserve estimation
exploration stage.
procedure(s) and classifications
Compositing was not applied.
applied.
Whether sample compositing
has been applied.
Orientation of Whether the orientation of
Not applicable, only one historic rock sample reported.
data in relation sampling achieves unbiased
No drilling undertaken or reported.
to geological sampling of possible structures
structure
and the extent to which this is
known, considering the deposit
type.
If the relationship between the
drilling orientation and the
orientation of key mineralised
structures is considered to have
introduced a sampling bias, this
should be assessed and
reported if material.
Sample security The measures taken to ensure
sample security.
Audits or
reviews
Only reporting historical data
The historical reports don’t record the chain of custody for
samples.
The results of any audits or
Only reporting historical data.
reviews of sampling techniques
and data.
Section 2: Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section)
Criteria
JORC-Code Explanation
Commentary
Mineral
tenement and
land tenure
status
Type, reference name/number, The Halls Peak Project comprises 5 granted Exploration Licenses
location and ownership
EL 4474, EL 7679, EL9428, EL9429, EL9430) located in north-eastern
including agreements or
NSW and covering an area of about 946km2.
material issues with third parties
such as joint ventures,
All tenements are granted.
partnerships, overriding royalties,
native title interests, historical
sites, wilderness or national park
and environmental settings.
Page 10 of 13
Criteria
JORC-Code Explanation
Commentary
The security of the tenure held
at the time of reporting along
with any known impediments to
obtaining a licence to operate
in the area.
Exploration
Acknowledgment and appraisal All historical exploration records are publicly available via the
done by other of exploration by other parties Geological Survey of New South Wales DIGS website.
parties
Key Sources of Exploration done by other parties include:
References
*1. Refer to CRR ASX Announcement 30 June 2023. Maiden
Mineral Resource Estimate for the Halls Peak Zn-Pb-Cu-Ag-Au
Project
*2. Refer to Larvotto Resources (ASX:LRV) ASX Announcement 5
August 2024. Measured Resource 448kt @ 3.8% Sb; Indicated
Resource 3,980kt @ 1.3% Sb and Inferred Resource 2,835kt @
0.9% Sb.
*3. Open File, DIGS Records, Geological Survey of New Soutth
Wales Report: Gilligan, L.B., Brownlow, J.W., Cameron R. G.,
Henley, H. F. & Degeling, P. R., 1992. Dorrigo-Coffs Harbour
1:250,000 metallogenic map SH/56-10, SH/56-11: metallogenic
study and mineral deposit data sheets, 509pp., Geological
Survey of N.S.W., Sydney.
Geology
Deposit type, geological setting Potential Hillgrove-style Orogenic Antimony-Gold System
and style of mineralisation.
Drill hole
Information
A summary of all information
Not applicable, no drilling undertaken or reported.
material to the understanding of
the exploration results including
a tabulation of the following
information for all Material drill
holes:
Easting and northing of the drill
hole collar
Elevation or RL (Reduced Level –
elevation above sea level in
metres) of the drill hole collar
Dip and azimuth of the hole
Page 11 of 13
Criteria
JORC-Code Explanation
Commentary
down hole length and
interception depth
hole length.
If the exclusion of this
information is justified on the
basis that the information is not
Material and this exclusion does
not detract from the
understanding of the report, the
Competent Person should
clearly explain why this is the
case.
Data
aggregation
methods
In reporting Exploration Results,
weighting averaging
techniques, maximum and/or
minimum grade truncations
(e.g., cutting of high grades)
and cut-off grades are usually
Material and should be stated.
No weighting of averaging techniques has been utilized.
No aggregations are reported.
No metal equivalents were used or calculated.
Where aggregate intercepts
incorporate short lengths of
high-grade results and longer
lengths of low grade results, the
procedure used for such
aggregation should be stated
and some typical examples of
such aggregations should be
shown in detail.
The assumptions used for any
reporting of metal equivalent
values should be clearly stated.
Relationship
between
mineralisation
widths and
intercept
lengths
These relationships are
Not applicable, no drilling undertaken or reported.
particularly important in the
reporting of Exploration Results.
If the geometry of the
mineralisation with respect to
the drill hole angle is known, its
nature should be reported.
If it is not known and only the
down hole lengths are reported,
there should be a clear
statement to this effect (e.g.,
‘down hole length, true width
not known’).
Page 12 of 13
Criteria
JORC-Code Explanation
Commentary
Diagrams
Appropriate maps and sections Pertinent maps for this stage of Project are included in the
(with scales) and tabulations of release.
intercepts should be included
Coordinates in MGA94
for any significant discovery
being reported These should
include, but not be limited to a
plan view of drill hole collar
locations and appropriate
Balanced
reporting
Where comprehensive reporting Results for single known historical rock samples reported in the
of all Exploration Results is not
release.
practicable, representative
All results described in this announcement have been reported.
reporting of both low and high
grades and/or widths should be
practiced to avoid misleading
reporting of Exploration Results.
Other
substantive
exploration
data
Other exploration data, if
Historical exploration data
meaningful and material, should A desktop geophysical review is underway to delineate target
be reported including (but not areas for field investigation. The review is assessing previous
limited to): geological
work carried out.
observations; geophysical
survey results; geochemical
survey results; bulk samples – size
and method of treatment;
metallurgical test results; bulk
density, groundwater,
geotechnical and rock
characteristics; potential
deleterious or contaminating
substances.
Further work
The nature and scale of
All historical explorat
Share your feedback
Discover