CRR Builds Solid-State Battery Layer in a Single Step
Released
Released
Announcement PDF
ASX ANNOUNCEMENT
16 JUNE 2026
Critical Resources Limited – www.criticalresources.com.au
Level 45, 108 St George's Tce, Perth WA 6000
P: +61 (8) 9465 1024 E. info@criticalresources.com.au
ASX:CRR
CATHODE, SOLID-STATE LITHIUM ELECTROLYTE AND
CONDUCTOR DEPOSITED IN A SINGLE DRY STEP
Manufacturing process breakthrough demonstrates a streamlined solid-state battery pathway
targeting high density computing, data centers, defence and aerospace applications.
- Complete composite layer built in one step: Cathode, solid-state electrolyte (LLZO reference)
and a carbon-nanotube matrix co-deposited in a single step, advancing manufacturing
potential for solid-state lithium-ion batteries. No solvents, no binders, no drying ovens.
- ‘3D printing’ Process: DSD builds the battery layer by “printing” cathode material in a single room-
temperature pass, building a dense, uniform layer. Removing solvents, drying lines and furnaces
targets some of the most energy and capital intensive steps in battery manufacturing.
- Embedded carbon-nanotube conductive network: a high-performance material was co-
deposited in the same single step, building conductivity directly into the layer.
- Why Solid-state: Increased energy density - more energy for less weight improves performance,
improved safety (non-flammable liquid electrolyte), and greater reliability across extreme
temperatures — making them better suited to defence, aerospace and high-density computing
applications.
- Form-flexible potential to ‘3D Print’ batteries to conform to the geometry of a platform's airframe
rather than to standard cell formats — technology class relevant to high-endurance aerospace
and satellite applications, with potential to reduce mass and thermal-management hardware.
- Why it matters: Battery chemistry performance is only valuable if it can be manufactured
reliably, safely and cost-effectively. This milestone shows cells can be built by a scalable, solvent-
free process — de-risking the licensable IP that underpins the program’s value.
- What comes next: Coin-cell electrochemical testing is underway to measure the baseline
performance with a full-format pouch cell currently being developed for independent
evaluation.
Critical Resources Limited (‘Critical Resources’ or the ‘Company’, ASX:CRR) is pleased to report progress in its
solid-state battery evaluation program: a complete cathode, electrolyte and conductive network layer
deposited in a single step — no solvents, no ovens, no furnaces. This delivers the next step flagged in the
Company’s 5 March 2026 announcement, progressing from a validated solvent-free LFP cathode to a
complete composite layer. The work is conducted at the South Dakota School of Mines & Technology within
the US National Science Foundation (NSF) supported Centre for Solid-State Electric Power Storage (CEPS)
research program.
Critical Resources Limited – www.criticalresources.com.au
Level 45, 108 St George's Tce, Perth WA 6000
P: +61 (8) 9465 1024 E. info@criticalresources.com.au
ASX:CRR
For Critical Resources, the purpose of the DSD evaluation program is a validated, solvent-free manufacturing
process that can be licensed to cell and component makers. Each milestone that de-risks that process widens
the licensing and partnership opportunity across the defence, aerospace, industrial and high-density
computing markets the Company is targeting.
This follows the Company’s recent non-sulphur electrolyte (ASE) benchmark results, which confirmed the
material conducts lithium ions at 3.2 mS cm⁻¹ — among the highest reported for non-sulphide, non-halide
amorphous electrolyte chemistries, making it suitable for defence, aerospace and industrial applications
where sulphide-based materials are ruled out on safety grounds (ASX:CRR announcement 28 May 2026). The
DSD milestone demonstrates that the electrolyte can also be manufactured reliably, using a solvent-free
process. Material performance is only valuable if it can be manufactured reliably. Both workstreams have
been advanced in parallel within the CEPS framework precisely to validate this integration.
In a material advancement for the Company’s solid-state battery evaluation program, solid electrolyte
material has been created via DSD — integrating a single composite cathode layer that combines cathode
material, solid electrolyte and a carbon-nanotube conductive network. The entire layer was produced in one
dry, room-temperature step, with no solvents, drying cycles or furnace processing, addressing the second half
of the solid-state challenge: how such materials can be manufactured.
What the deposited layer actually looks like
Figure 1 - Surface view of the LFP/LLZO/CNT matrix. Scanning electron microscope (SEM) images of the single-
step, solvent-free co-deposited layer. Left: wide-field view (20µm) of the composite cathode/electrolyte layer
(LFP cathode, LLZO reference electrolyte and carbon-nanotube network), showing a dense, uniform coating.
Top right: higher-magnification image (1 µm), showing the distribution of cathode and electrolyte particles.
Bottom right: higher-magnification image (500nm) showing intact carbon-nanotube network after deposition.
Each carbon-nanotube is roughly a few thousand times thinner than a human hair, forming a lightweight
conductive network.
STRATEGIC CONTEXT
Solid-state battery technology offers fundamental advantages over conventional lithium-ion in high-reliability
applications: safety, superior energy density at lower system weight, and improved thermal stability across a
broad operating range. Critical Resources’ evaluation program is specifically designed to validate
manufacturing methodologies that preserve these advantages while remaining compatible with defence,
Critical Resources Limited – www.criticalresources.com.au
Level 45, 108 St George's Tce, Perth WA 6000
P: +61 (8) 9465 1024 E. info@criticalresources.com.au
ASX:CRR
industrial, and high-density computing environments — settings where conventional lithium-ion batteries face
thermal, weight, and reliability constraints.
Critical Resources’ model is to develop and license battery and manufacturing-process intellectual property
— not to manufacture. The Company holds interests in both lithium resources (Mavis Lake Lithium Project) and
next-generation battery technology IP, advancing independently, with each broadening the Company’s
optionality across future partnerships, licensing and commercial pathways.
Critical Resources holds an exclusive option over a portfolio of solid-state battery patents developed at the
South Dakota School of Mines & Technology — five granted US patents and one pending application (refer
ASX:CRR announcement 18 November 2025). One of those granted patents (US 10,991,976, a high-
temperature solid-state electrolyte (HTE)) was developed with NASA support; as is standard for federally
supported inventions, the United States Government retains certain rights in that patent. All new materials,
processes and structures developed under the CEPS framework, including the dry-deposition work reported
here, are being protected through filed provisional patent applications, reinforcing the Company's licensable
IP position (refer ASX:CRR announcement 5 March 2026).
CONVENTIONAL LITHIUM-ION SOLID-STATE DESIGN
Energy density
✕ Lower — bulky separators and liquid
volumes limit energy per kilogram
✓ Higher potential — more usable
energy in less weight and volume
Safety
✕ Flammable liquid electrolyte —
carries thermal-runaway and fire risk
✓ No flammable liquid — thermal-
runaway pathway substantially
reduced
Operating temperature
✕ Narrower window — performance
degrades under heat or cold
✓ Wider range — more stable across
temperature extremes
These are potential advantages of the solid-state technology class and are not results demonstrated by CRR. Realising them at commercial scale
depends on solving the manufacturing challenge — the focus of CRR’s solid-state lithium-ion battery evaluation program.
Figure 2 – Benefits of solid-state lithium-ion cell architecture.
The DSD workstream is therefore being validated as a licensable, solvent-free process rather than a
production line the Company would build or own. Rather than backing a single route at this early evaluation
stage, CRR is validating two parallel solvent-free deposition methodologies — broadening the licensable
process-IP position and allowing direct comparison of interface quality, repeatability and scalability across
both approaches.
Because DSD deposits active material directly rather than assembling and pressing finished layers, it dispenses
with solvents, binders and much of the conventional cell housing — and carries a second advantage beyond
simpler manufacturing: form-factor freedom. A deposition-based process could, in principle, build cells to the
geometry of the host platform rather than to standard cell formats, reducing both mass and the surrounding
thermal-management hardware. This is the same principle driving lightweight energy-storage research in
aerospace, from high-altitude solar UAVs dependent on overnight endurance to structural-battery work
integrating cells into airframes. For a company licensing process IP rather than building cells, a capability like
this widens the range of platforms a future licensee could serve.
Critical Resources Limited – www.criticalresources.com.au
Level 45, 108 St George's Tce, Perth WA 6000
P: +61 (8) 9465 1024 E. info@criticalresources.com.au
ASX:CRR
The thermal tolerance, safety and energy density that suit defence and computing extend this relevance
further — to space and satellite platforms, where conventional liquid-electrolyte cells face fundamental
constraints that solid-state chemistry addresses at the architecture level.
THE MILESTONE: A COMPLETE COMPOSITE LAYER IN ONE STEP
Building a solid-state battery requires bringing together three things that normally have to be made and joined
separately: the cathode (which stores energy), the solid electrolyte (which carries lithium ions), and an
electronic conductor (which moves electrons in and out). Achieving strong interface stability between these
materials is one of the hardest problems in the field — poor contact between them is a leading cause of solid-
state cell failure.
Using DSD, CRR’s program deposited all three together in a single composite layer. The composite combined
lithium iron phosphate (LFP) cathode material, lithium lanthanum zirconium oxide (LLZO) solid electrolyte, and
carbon-nanotubes (CNT), accelerated onto a battery-grade aluminium foil substrate. The result was a dense
coating approximately 15 microns thick, with EDS analysis confirming the electrolyte was evenly distributed
across the surface rather than clumped or patchy (Figure 1).
The electrolyte used in this trial was LLZO, a well-characterised reference electrolyte chosen to validate the
deposition process. It is distinct from the Company’s proprietary Amorphous Solid-State Electrolyte (ASE);
depositing the ASE material by DSD is a later development step.
IN PLAIN TERMS
DSD builds the battery layer similar to 3D printing — spraying prepared material onto a surface in one
room-temperature pass. It replaces a chain of energy- and capital-intensive stages with a single dry step.
Doing this in a single step tackles two challenges together: the difficult join between the cathode and the
electrolyte (press/compression), and the cost, energy and complexity of conventional battery
manufacturing. Critical Resources’ DSD process tackles both problems at once. Extending it to deposit
the electrolyte on its own is the next step toward simpler, lower-cost solid-state battery manufacturing.
Critical Resources Limited – www.criticalresources.com.au
Level 45, 108 St George's Tce, Perth WA 6000
P: +61 (8) 9465 1024 E. info@criticalresources.com.au
ASX:CRR
WHY THESE RESULTS MATTER
– Tackles the hardest interface in the cell: Co-depositing electrolyte and cathode together distributes
cathode–electrolyte contact throughout the composite as it is built, rather than trying to press two
finished layers together afterwards.
– Solvent-free and low-temperature: Removing solvents, drying lines and furnaces reduces the cost,
energy use, footprint and complexity of manufacturing — and removes a major weight and thermal
burden for batteries deployed in defence, industrial and high-density computing environments.
– Built around CRR’s extreme-environment focus: The approach is aligned with the Company’s focus
on batteries that perform where conventional lithium-ion struggles — across wide temperature
ranges and demanding duty cycles.
– Relevant to emerging high-value markets: The same characteristics that CRR's program is
advancing — thermal stability, non-flammable chemistry, high energy density and reliable
performance across extreme temperature ranges — are the same requirements increasingly
identified for space and satellite applications. The technology addresses these environments not as
an adjacent opportunity, but as a direct extension of its core design focus.
CARBON-NANOTUBES: AN ADVANCED CONDUCTIVE NETWORK, BUILT IN
Carbon-nanotubes are among the most studied advanced nanomaterials in energy storage. Each tube is a
cylinder of carbon roughly a few thousand times thinner than a human hair, yet exceptionally strong and
highly electrically conductive. In a battery electrode they form a continuous, lightweight network that moves
electrons efficiently while using far less material than conventional carbon additives.
In CRR’s composite, carbon-nanotubes were co-deposited in the same supersonic spray step as the cathode
and electrolyte, forming a conductive network distributed through the layer and visible across the coating
surface. Embedding this network directly during a single dry deposition step — rather than mixing it into a wet
slurry and drying it — reflects the kind of advanced-materials engineering the Company is pursuing to
differentiate its technology.
TWO WORKSTREAMS, ONE INTEGRATED STRATEGY
CRR’s solid-state battery evaluation program advances two complementary workstreams. The ASE
workstream addresses the core materials challenge — how well the electrolyte conducts lithium ions and how
stable it is. The DSD workstream addresses the manufacturing challenge — how the electrolyte and cathode
can be built into a working cell without solvents or furnaces. The milestone reported here connects the two: it
demonstrates that electrolyte material can be incorporated into a manufactured composite layer using a
scalable, solvent-free process.
The two workstreams are complementary, not independent: solid-state development requires both an
electrolyte that conducts lithium ions efficiently across a wide temperature range and a manufacturing
method compatible with solid-state architectures.
ASE program (materials): Addresses the core materials challenge — ionic conductivity and activation energy.
Benchmark results establish competitive performance on both primary metrics from a first-pass, unoptimised
composition.
Critical Resources Limited – www.criticalresources.com.au
Level 45, 108 St George's Tce, Perth WA 6000
P: +61 (8) 9465 1024 E. info@criticalresources.com.au
ASX:CRR
Manufacturing program (fabrication): Addresses the manufacturing pathway — solvent-free, low-
temperature cathode and electrolyte fabrication. Dual-pathway results establish feasibility of the solvent-free
approach and a repeatable manufacturing baseline. Solvent-free, dry fabrication has independently
emerged as the preferred manufacturing architecture in advanced aerospace battery programs: NASA’s
SABERS program (Solid-state Architecture Batteries for Enhanced Rechargeability and Safety) adopted the
same dry-process principle as one of its core manufacturing innovations.
The same properties CRR’s program is validating — high energy density, non-flammable electrolyte, wide
temperature range, and the potential to be ‘printed’ into any form — make solid-state batteries an important
requirement for the growth of defence, aerospace and high-density computing applications where
conventional lithium-ion cells fall short.
Figure 3: Potential target applications of solid-state battery technology. The attributes CRR's program is validating — high
energy density, non-flammable electrolyte, wide temperature range, and form-flexible deposition — address the core
constraints that limit conventional lithium-ion in each of these environments.
WHERE WE ARE: PROGRAM PROGRESS AT A GLANCE
Program Stage Workstream Status
Electrolyte material benchmarked (ionic conductivity, stability). ASE (electrolyte) ✓ Complete
Single-step composite layer deposited (cathode + electrolyte +
conductor, solvent-free).
DSD (manufacturing) ✓ Complete
Coin cell electrochemical baseline (charge/discharge vs. known
reference).
DSD (manufacturing) In progress
Full-format pouch cell prototype.
DSD + benchmark
electrolyte
Next
Independent testing of DSD pouch cell prototype.
DSD + benchmark
electrolyte
Next
FULL SOLID-STATE CELL: Solid-state ASE and HTE electrolytes integrated
with DSD process.
ASE + DSD Planned
Critical Resources Limited – www.criticalresources.com.au
Level 45, 108 St George's Tce, Perth WA 6000
P: +61 (8) 9465 1024 E. info@criticalresources.com.au
ASX:CRR
Critical Resources Managing Director, Tim Wither, commented: ‘Depositing solid electrolyte, cathode and
a carbon-nanotube conductive network in a single step, is a genuine milestone for our program. The
hardest part of a solid-state battery is the join between the cathode and the electrolyte, and forming that
join during manufacture — rather than pressing finished parts together afterwards — is exactly the kind of
problem this technology is designed to solve.’
‘Doing it solvent-free, at room-temperature, and with an advanced carbon-nanotube network built in,
points to a cleaner and simpler way of making these cells. Pairing this with our ASE electrolyte results means
we are now making progress on both halves of the solid-state battery problem — the material and the
manufacturing.’
‘This is early-stage laboratory work, not commercial manufacturing. Depositing a standalone electrolyte
layer on its own is still in development, and we are working through it methodically. But the direction is very
encouraging, and we will keep advancing it through a disciplined, capital-light evaluation approach with
outstanding work from the South Dakota School of Mines team.’
NEXT STEPS
Critical Resources will continue advancing the DSD program under the structured evaluation framework with
CEPS and SDM. These activities are designed to strengthen the technical foundation of the Company’s solid-
state battery strategy without implying commercial manufacturing at this stage. Key next steps include:
– Standalone electrolyte deposition: Condition electrolyte feedstock (including ball-milling to improve
particle sphericity and flow) to progress toward deposition of a discrete, pure-electrolyte layer by DSD.
– Composite characterisation: Complete SEM, XRD and XPS analysis of the deposited composite to confirm
coating density, phase stability and the distribution of the electrolyte and carbon-nanotube network.
– Electrochemical baseline testing underway: Coin cell (CR2032) electrochemical testing of the DSD
composite has commenced. A liquid electrolyte is used as a known performance reference — standard
practice at this stage — to establish a baseline ahead of solid-state electrolyte integration. Early
electrochemical results show charge and discharge behaviour consistent with the cathode / electrolyte
materials performing as expected. Full characterisation is ongoing. Results will inform the transition to full-
format pouch cell testing.
– Process optimisation: refine deposition parameters using the computational model to widen the
operating window systematically.
These activities represent defined technical gates within CRR’s broader solid-state battery evaluation
strategy, designed to systematically de-risk solvent-free manufacturing pathways while maintaining a
disciplined, capital-light, laboratory-stage evaluation approach. Outcomes will inform prototype
development strategy and downstream partnership, validation or licensing opportunities aligned with
defence, industrial, and high-reliability infrastructure markets.
Critical Resources Limited – www.criticalresources.com.au
Level 45, 108 St George's Tce, Perth WA 6000
P: +61 (8) 9465 1024 E. info@criticalresources.com.au
ASX:CRR
This announcement has been approved for release by the Board of Directors of Critical Resources.
To receive alerts for ASX announcements and updates sign up at www.criticalresources.com.au or for further
information please contact us directly at:
E: info@criticalresources.com.au
P: +61 (8) 9465 1024
ABOUT CRITICAL RESOURCES LIMITED
Critical Resources Limited (ASX:CRR) is an Australian mining and technology company focused on the
discovery and development of critical metals and next generation technologies essential to a sustainable
future. The Company holds a diversified portfolio including the Mavis Lake Lithium Project in Ontario, Canada,
the Halls Peak Base Metals Project in New South Wales, and a growing gold portfolio in New Zealand.
The scientific and technical information in this announcement relating to the solid-state battery program is based on, and fairly represents,
information reviewed and approved by Dr Alevtina Smirnova, Director of the US National Science Foundation–supported Centre for Solid-
State Electric Power Storage at the South Dakota School of Mines & Technology and Technical Advisor to Critical Resources. The
underlying experimental work was conducted by the CEPS research team at the South Dakota School of Mines & Technology. Dr
Smirnova has consented to the inclusion of this information in the form and context in which it appears.
FORWARD LOOKING STATEMENTS
This announcement may contain certain forward-looking statements and projections, including statements regarding the Company’s
solid-state battery technology and intellectual property programs, the expected performance, optimisation and development of its
electrolyte and manufacturing workstreams, the potential applications and markets for that technology, and the Company’s plans with
respect to its mineral properties and programs. Forward-looking statements can generally be identified by words such as ‘may’, ‘expect’,
‘intend’, ‘plan’, ‘target’, ‘potential’, ‘anticipate’ and similar expressions. Such forward-looking statements/projections are estimates for
discussion purposes only and should not be relied upon. They are subject to known and unknown risks, uncertainties and assumptions
and may therefore differ materially from results ultimately achieved. The benchmark assessment and laboratory results referred to in this
announcement are early-stage and are not indicative of commercial performance. There can be no assurance that ongoing
optimisation will achieve improved or commercially viable results, that the Company’s battery technology will be successfully developed,
scaled or commercialised, or that any intellectual property option held by the Company will be exercised or prove valuable. There can
also be no assurance that CRR’s plans for development of its mineral properties will proceed as currently expected, that the Company
will be able to confirm the presence of additional mineral resources, that any mineralisation will prove to be economic, or that a mine
will successfully be developed on any of CRR’s mineral properties. Critical Resources Limited does not make any representations and
provides no warranties concerning the accuracy of the projections and disclaims any obligation to update or revise any forward-looking
statements/projections based on new information, future events or otherwise, except to the extent required by applicable laws. While
the information contained in this announcement has been prepared in good faith, neither Critical Resources Limited nor any of its
directors, officers, agents, employees or advisors give any representation or warranty, express or implied, as to the fairness, accuracy,
completeness or correctness of the information, opinions and conclusions contained in this announcement.
Critical Resources’ Interactive Investor Hub
Engage with Critical Resources directly by asking questions, watching video summaries and
seeing what other shareholders have to say about this, as well as past announcements.
For more information visit: www.criticalresources.com.au
Share your feedback
Discover